Drag Line Excavator
Drag line excavator systems are heavy machinery that is used in civil engineering, surface mining, and excavation. With civil engineering, the smaller types are used for road and port construction. The larger types of drag line excavators are used in strip mining operations to extract coal. These are among the largest types of mobile equipment and weigh upwards of 10,000 tons!
The drag line excavator bucket system consists of a large bucket that is suspended from a boom. The bucket is moved by a number of chains and ropes. The hoisting rope, which is powered by either a large diesel or electric motor, will support the bucket and hoist coupler assembly from the boom. The drag rope on the assembly is used to draw the bucket assembly horizontally. Through skillful maneuvering of the hoist and drag rope, the bucket can be controlled for many different types of operations.
Operation With a typical excavation cycle, the bucket is positioned high above the material that is being excavated. The bucket is then lowered down and the drag rope is drawn so that the bucket is dragged along the materials surface. Using the hoist rope, the bucket is then lifted. A swing operation is then performed in order to move the bucket to the place where the material is going to be dropped. The drag rope is then released which will cause the bucket to tilt, making the material in the bucket fall down, which is commonly known as a dump operation.
With smaller drag line excavators, the bucket is thrown by winding up the jib then releasing a clutch on the drag cable, which swings the bucket like a pendulum. Skillful operators can make the bucket land about 1/2 the length of the jib further away than if it had just been spun or dropped.
Limitations The limitations of drag line excavators are the height and length of their boom, as this limits where the drag line can dump waste material. Being inherent with their construction, the drag line is most effective when excavating material below the level of their tracks. Drag lines aren't suitable for loading piled up material.
Despite their limitations and high capital cost, drag line excavators remain very popular with several mines, due to their very low waste removal cost, performance, and reliability.
They also have different cutting sequences. The first is the side casting method which uses offest benches. This method involves throwing the overburden sideways onto blasted material to make a bench.
The second method is a key pass. This pass will cut a key at the toe of the new highwall and will also shift the bench further towards the low wall. This can also require a chopping pass if the wall is blocky. A chopping pass will involve the bucket being dropped down onto an angled highwall to scale the surface.
The next method is the slowest, known as the blocks pass. This method will however, move the most material. The blocks pass involves using the key to access the bottom of the material to lift it up to spoil or to an elevated bench level. If required, the final cut is a pull back, which pulls the material back further to the low wall side.
For construction, mining, or excavation, drag line excavators are great to have. They can move even the biggest of material, which is great for deep holes in the ground. If you've been looking for a great way to maximize mining or excavation productivity, the drag line excavator is just what you need.
PPPPP
(word count 594)
|
Compact Excavator The compact hydraulic excavator can be a tracked or wheeled vehicle with an approximate operating weight of 13,300 ... read more
Comparing Trenchers To Compact Excavators Both of these machines are affordable, popular, highly productive, and they both have helped lay ... read more
Drag Line Excavator Drag line excavator systems are heavy machinery that is used in civil engineering, surface mining, and excavation. ... read more
Case CX700 And CX330 The company of Case has done it again, by introducing yet another spectacular excavator, the CX700, ... read more
Trenching And Plowing Equipment When trenchers were first introduced to the residential and commercial contractors, they rapidly became the backbone ... read more
Harvester The harvester is a type of heavy machinery that is employed in cut to length logging operations for felling, ... read more
Skid Loader The skid loader is a rigid frame, engine powered machine with lift arms that are used to attach ... read more
Cranes A crane is a tower or derrick that is equipped with cables and pulleys that are used to lift ... read more
Different Types Of Backhoe Loaders Caterpillar Caterpillar hit a dial of power and performance with its top of the line ... read more
Operating A Backhoe Safely A skid steer loader with backhoe attachment or a backhoe loader in general can be very ... read more
Caterpillar Equipment Caterpillar Incorporated, also known as CAT is a United States based corporation that is based in Peoria, Illinois. ... read more
Bulldozer The bulldozer is a very powerful crawler that is equipped with a blade. The term bulldozer is often used ... read more
Trench Digging Digging trenches is one of the oldest types of work with both construction and excavating. Prior to World ... read more
Forklift Sometimes called a forklift truck, the forklift is a powerful industrial truck that is used to lift and transport ... read more
Case CX330 As you may know, the CX330 is the upgrade to the 9050B model from Case. The CX330 is ... read more
Hydraulic Machinery Hydraulic machinery are machines and tools that use fluid power to do the work. Almost all types of ... read more
Front Loader Also known as a front end loader, bucket loader, scoop loader, or shovel, the front loader is a ... read more
Caterpillar D-11 The D-11 from Caterpillar is among the series of tracked type tractors are among the largest conventional bulldozers ... read more
Dump Truck Dump trucks or production trucks are those that are used for transporting loose material such as sand, dirt, ... read more
How The Equipment Has Changed There are many different opinions as to what machines should actually be classified as earth ... read more
Caterpillar D Series The CAT (Caterpillar) 420D and 430D backhoe loaders are the high performance machines in the D series ... read more
Easy Site Prep Site prep is the best term that is used to describe the operations necessary to make raw ... read more
Renting Versus Owning Equipment There are always going to be times when, no matter how carefully an excavation company plans ... read more
Backhoe Loader Also referred to as a loader backhoe, the backhoe loader is an engineering and excavation vehicle that consists ... read more
Excavation Excavation is most commonly and best known for a technique within the science of archaeology. The individual types of ... read more
|
|
|
Disclaimer:
The Publisher has strived to be as accurate and complete as possible in
the creation of this website, notwithstanding the fact that he does not
warrant or represent at any time that the contents within are accurate
due to the rapidly changing nature of the Internet.
This site
is a common sense guide to Drag Line Excavator. In practical advice websites,
like anything else in life, there are no guarantees of income made.
Readers are cautioned to reply on their own judgment about their
individual circumstances to act accordingly.
This site
is not intended for use as a source of legal, business, accounting or
financial advice. All readers are advised to seek services of competent
professionals in legal, business, accounting, and finance field.
Any
perceived slights of specific people or organizations are unintentional.
|